Marantz – Wired Up Technology | Home Theater Installation, Home Automation, TV Mounting, Smart Home and more.

Marantz MM8077 7-Channel Power Amplifier

Kevin Hernandez — Tue, 08 Dec 2020 21:22:44 +0000

Current Feedback Discrete Power Amplifier

This model is equipped with a current feedback amplifier section that uses the same push-pull circuit found in Marantz’s SM-11S1 Hi-Fi power amplifier. This amp is designed to provide increased operating stability, high-speed, and wide ranging high-density playback. The current/voltage conversion amplification section in the latter part of the power amp is equipped with a Wilson current mirror circuit that amplifies to the high sound range with low distortion.

Large Toroidal Power Transformer

The high power, high current power supply features a massive toroidal power transformer that can handle substantial short term power peaks. The high capacity power supply capacitors, 100,000µ total, contribute to the amplifier’s ability to deliver short term bursts of power when needed, which is helpful when driving difficult-to-drive lower impedance speakers.

High-Quality Design

This amplifier is equipped with a chimney-shaped heat sink to efficiently process the heat emitted from each channel along with quiet cooling fans. A high-sensitivity temperature sensor IC is used to control the cooling fans, adjusting the rotation speed to match the amount of heat generated by the amp.

Balanced and Unbalanced Inputs

For installation flexibility and maximum compatibility, each channel on this amplifier is equipped with balanced and unbalanced inputs.

Custom Installation-Ready

This amplifier has an IR flash input that supports custom installations and DC trigger input and output terminals.

Remote Power Control

When the Marantz AV8801 or AV7701 pre-amplifier is connected to the MM8077, the remote power control feature links the power on/off function of the pre-amplifier to the MM8077.

Low-Power Standby Mode

For environmental and energy-saving considerations, power consumption during standby mode has been reduced to less than 0.4 W

Auto-Standby Mode

The MM8077 automatically switches to standby mode when there has been no signal for 30 minutes. This prevents power from being wasted whenever you forget to turn the power off.

Marantz SR6014 9.2-Channel Network A/V Receiver

Kevin Hernandez — Tue, 08 Dec 2020 21:16:46 +0000

Enjoy object-based surround sound with your favorite speaker system and the Marantz SR5015 7.2-Channel Network A/V Receiver. It supports the Dolby Atmos and DTS:X object-based audio formats and has Bluetooth, Wi-Fi, HEOS, and Apple AirPlay 2 built-in for wirelessly connecting with your compatible smart devices. Additionally, the onboard network connectivity allows the receiver to be voice-controlled through your Amazon Alexa, Google Assistant, Siri, or Josh.ai ecosystem or via the HEOS app.

Marantz NR1200 2.1-Channel Network A/V Receiver

Kevin Hernandez — Tue, 08 Dec 2020 21:07:11 +0000

Onboard Wi-Fi and Ethernet connectivity allows the NR1200 to access a variety of internet-based music sources. As an added convenience, you can download the Marantz AVR Remote app from the Apple App Store or Google Play to control the receiver from your Android or iOS devices. You can also control the receiver with just your voice via your Amazon Alexa- or Google Assistant-enabled device.

With five HDMI inputs and one output, this receiver can act as a video switcher for your HD source components. It will pass through HDR, 4K UHD, and 3D signals for simple integration into your home theater. The receiver also has a USB port for accessing media stored on USB flash drives.

Slim Profile

At roughly half the height of a traditional A/V receiver, the NR1200 helps you maximize space in your installation.

Power to Suit Your Preferences

With its high-current discrete power amplifier capable of delivering 75W per channel at 8 ohms, the NR1200 can deliver the sound you require for your high-resolution musical collection.

HDMI Connectivity with HDR and HDCP 2.3 Support

With five HDMI inputs and one HDMI output, the NR1200 supports 4K Ultra HD 60 Hz video, 4:4:4 Pure Color sub-sampling, HLG and HDR10, 21:9 video, 3D, and BT.2020 pass-through on every input. It also features HDCP 2.3 compatibility for UHD copy protected content on all HDMI inputs, allowing compatibility with Blu-ray players and UHD streaming devices. Additionally, ARC, (Audio Return Channel) supports the transmission of audio from your TV with a single HDMI cable, simplifying overall setup. The HDMI inputs can automatically rename themselves with information provided by the source device.

Dual DAC Differential Circuit Design

The NR1200 features two separate DACs per channel to help increase the dynamic range and signal-to-noise ratio for clearer sound, even from sources with low signal resolution.

Left/Right Power Amplifier Design

The amplifier circuit design of the NR1200 features separate, symmetrical left and right power amplifiers with a central power supply distribution to help improve channel separation, reduce crosstalk, and preserve the musical soundstage.

Separate Power Transformer for Sound Purity

The power transformer is wired independently from the circuits for the amplifier, pre-amplifier, wireless module, and front display to help reduce interference for clearer sound.

A/B Speaker Selection

The NR1200 features A/B speaker selection, letting you configure it to drive two pairs of speakers in separate rooms, or to drive a single pair of bi-wired speakers.

Streaming & Multi-Room Listening

Stream popular music services like Spotify, Pandora, TIDAL, your locally stored library, and more via Bluetooth, AirPlay 2, or the HEOS app. With HEOS Built-in technology, you can enjoy your favorite music in any room of your home equipped with a compatible device for a wireless, whole-home audio experience. Play the same song in every room or select a different song for each connected room.

Marantz PM7000N Stereo 120W Network Integrated Amplifier

Kevin Hernandez — Tue, 08 Dec 2020 20:55:36 +0000

Fully Discrete Current Feedback Power Amplifier

Current Feedback amplification is designed to match the requirements of Super Audio hi-res music for wide-bandwidth, high-speed reproduction. The impedance at the Current Feedback point is limited, generating a low phase shift, and feedback amplifiers reduce the need for phase compensation by minimizing negative feedback (NFB). This helps simplify the signal path, resulting in a high through-rate, enhanced transient response, and augmented sonic transparency across the full bandwidth. Current Feedback renders the amplifier nearly immune to difficult speaker loads.

HDAM-S3 Technology

Hyper-Dynamic Amplifier Modules (HDAMs) are discrete circuit boards engineered with discrete surface mount components with short mirror-image left and right signal paths to outperform Op-amps in slew rate and noise level for more dynamic, accurate, detailed sound.

Toroidal Transformer

The toroidal transformer is designed to offer enhanced efficiency and power capability, with low EM radiation and mechanical vibration for augmented sound quality.

Separate Power Supply for Standby Mode

In order to reduce power consumption in standby mode, the PM7000N uses separate power supply circuits. While in standby, the digital SMPS power supply is active, so the network can wake up the amplifier. When switching to operation mode, the SMPS power is switched off and the toroidal transformer is activated to supply the necessary current to drive your speakers.

Pre-Amplifier Circuit with HDAM

The electric volume control uses Marantz HDAM technology to augment its channel separation, dynamic range, S/N ratio, linearity, and distortion reduction, while retaining the operational feel of an analog volume control.

Built-In Bluetooth, Wi-Fi, AirPlay 2 & HEOS Compatibility

Enjoy Bluetooth and dual-band Wi-Fi streaming, even in congested urban environments. Listen to your favorite audio content wirelessly from your compatible smart devices. With HEOS built-in technology, you can play the same song in every room or a different song in each connected room HEOS supports free and premium Spotify, Pandora, TIDAL, and more. AirPlay 2 lets you enjoy all your favorite songs from Apple Music, plus multi-room audio with other compatible components.

Works with Various Voice Assistants

Control the amplifier hands-free with your Amazon Alexa, Google Assistant, Apple Siri, or Josh.ai ecosystem. Adjust the volume, skip to the next track, switch inputs between your different connected media players, and more. You can also control the amplifier with the HEOS remote app. Availability varies by region and country.

Versatile Connectivity

The PM7000N is equipped with four analog inputs and one analog output, and features a digital coaxial and two optical inputs, along with a USB Type-A input for high-resolution audio files. Connect your compatible TV, cable/satellite box, and Blu-ray or DVD player to any of the three digital audio inputs to enjoy full, dynamic range of digital audio playback of your movies and TV shows. All the digital inputs can automatically wake the amplifier when their signal is detected from the TV, and your TV’s remote can be programmed to directly control the master volume control, mute, power on/off, and source selection

Marantz SR5015 7.2-Channel Network A/V Receiver with HEOS

Kevin Hernandez — Tue, 08 Dec 2020 20:38:45 +0000

Marantz SR6015 9.2-Channel Network A/V Receiver with HEOS

Kevin Hernandez — Tue, 08 Dec 2020 20:22:21 +0000

Enjoy object-based surround sound with your favorite speaker system and the Marantz SR6015 9.2-Channel Network A/V Receiver. It supports the Dolby Atmos and DTS:X object-based audio formats and has Bluetooth, Wi-Fi, HEOS, and Apple AirPlay 2 built-in for wirelessly connecting with your compatible smart devices.

Marantz AV7706 11.2-Channel Network Preamplifier with HEOS

Kevin Hernandez — Tue, 08 Dec 2020 20:10:48 +0000

Onboard Wi-Fi and Ethernet connectivity allows the AV7706 to access music from your connected computer or NAS. Amazon Alexa, Google Assistant, Siri, and Josh.ai compatibility enables you to control certain functions of the preamplifier with just your voice through your compatible devices. With eight HDMI inputs and three outputs, the AV7706 can act as a video switcher for your HD source components. It will pass through HDR 8K UHD signals as well as HDR10, HDR10+, Dolby Vision, and HLG HDR formats. The preamplifier also has a USB port for accessing media stored on USB flash drives.

Designed to Produce a Musical Sound

The AV7706 is tuned by Marantz sound masters to deliver a unique, musical sonic signature from nearly any source.

For Versatile Home Theater Setups

This preamp is engineered to provide versatile setup options. Featuring 11.2-channel XLR and RCA pre-outs, the AV7706 is built for use with high-quality external power amplification or active speakers for audiophile sound. It uses an HDAM circuit board to help the preamp section provide optimal channel separation, minimum crosstalk, and an enhanced signal-to-noise ratio for precise detail resolution and stereo imaging, while the ELNA capacitors of the analog section help offer augmented power and dynamic ability.

Advanced HDMI Section

Eight HDMI inputs and three outputs are onboard to accommodate your favorite sources. One HDMI input supports 8K/60 Hz or 4K/120 Hz pass-through, 4:4:4 Pure Color sub-sampling, Dolby Vision, HLG, HDR10, 21:9 video, 3D, and BT.2020 pass-through; HDCP 2.3 copyright protection is supported on all HDMI inputs, allowing you take your home entertainment up a notch with HDR10+, Dynamic HDR, ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), QMS (Quick Media Switching), and QFT (Quick Frame Transport) support. The processor can also upscale your native video source to near-8K quality.

HDMI eARC Object-Based Audio Support

eARC (Enhanced Audio Return Channel) supports the transmission of 3D audio from your display’s apps over a single HDMI cable for a simple setup.

Object-Based Audio Format Support

Dolby Atmos, DTS:X, Auro-3D, DTS Neural:X, and DTS Virtual:X are designed to create realistic surround sound, positioning and moving individual sounds to nearly any virtual point in your room, including overhead, using up-firing or dedicated overhead speakers. DTS Virtual:X creates virtual height effects in 7.1-, 5.1-, or 2.1-channel speaker arrangements.

IMAX Enhanced Technology

IMAX Enhanced certification designates that the AV7706 meets certain audio and video performance criteria set by a committee of IMAX and DTS engineers and A/V technical specialists. These criteria include image, sound, scale, and content quality. Onboard IMAX calibrated modes are set and approved by Hollywood colorists to help provide enhanced picture and sound for HDR UHD content.

Amazon Alexa Voice Control

Ask Alexa to play music from Pandora, Spotify, Amazon Music, and more. You can switch between inputs, adjust the volume, pause, mute, and play the next song, all with your voice.

Google Assistant Voice Control

Ask the Google Assistant built into your compatible device to control content across your listening environment. Start music in the HEOS app, then ask your Google Assistant to control volume, playback, and more.

Josh.ai Smart Home Voice Automation

Josh.ai is designed to offer flexible voice control for the AV7706 and the rest of your compatible smart home. It is installed by custom integrators and accessed through an app on your iOS or Android phone or tablet.

AirPlay 2 & Siri Voice Control

Stream audio from your favorite music services like Apple Music and Spotify or watch videos from services like YouTube and Netflix from any iOS, Mac, or Apple TV device and hear the audio synced to your speakers with AirPlay 2. Wireless multi-room audio is also supported, allowing you to wirelessly stream content to multiple AirPlay 2-compatible devices simultaneously with enhanced audio buffering to help ensure smooth audio playback. AirPlay 2 also provides control and grouping of compatible audio devices within the Apple Music or Home App. Use AirPlay 2 in-app or with your voice via Siri.

Enhanced Wireless Connectivity

The AV7706 is equipped with a dual-antenna system that allows streaming via Bluetooth, Wi-Fi, AirPlay 2, or the HEOS app. In addition to streaming to the preamp over Bluetooth, you can also stream from the preamp to your Bluetooth headphones or speakers, or to headphones and speakers simultaneously. This is convenient if you have a family member or friend who is hearing impaired, to accommodate their headphones and in-room speakers.

Marantz NA6006 Network Audio Player

Kevin Hernandez — Tue, 08 Dec 2020 20:03:12 +0000

Amazon Alexa Voice Control

Ask Alexa to play music from Pandora, Spotify, Amazon Music, and more. You can switch between inputs, adjust the volume, pause, mute, and play the next song, all with your voice.

Google Assistant Voice Control

AirPlay 2 & Siri Voice Control

Josh.ai Smart Home Voice Automation

Josh.ai is designed to offer flexible voice control for the NA6006 and the rest of your compatible smart home. It is installed by custom integrators and accessed through an app on your iOS or Android phone or tablet.

Marantz 2016 AVR Remote App

Download the Marantz 2016 AVR Remote app for control of the receiver and access to its setup menu for detailed adjustments from your compatible iOS, Android, and Kindle devices.

Marantz NR1711 7.2-Channel Network A/V Receiver

Kevin Hernandez — Tue, 08 Dec 2020 19:52:07 +0000

7-Channel Discrete Power

The NR1711 features a high-current discrete power amplifier section with identical power on all seven channels and low-impedance drive capability for enhanced speaker control. Auto Eco Mode is designed to adjust power output to speakers based on the volume level without sacrificing sound quality, and an on-screen eco meter shows you power consumption in real time.

Slim Profile

At roughly half the height of traditional A/V receivers, the NR1711 is engineered to deliver musical sound.

8K HDMI Support

In addition to 8K UHD upscaling, all six HDMI inputs support Dolby Vision, HLG, HDR10, 4:4:4 Pure Color sub-sampling, 21:9 video, BT.2020 pass-through, CEC, and HDCP 2.3 copy protection. One dedicated 8K HDMI input provides 8K/60 Hz picture quality for enhanced clarity and contrast. The receiver also provides a virtually lag-free gaming experience with 4K/120 Hz pass-through, ALLM, VRR, and QFT support.

eARC for Object-Based Audio from TV Apps

The eARC-compatible HDMI output transmits uncompressed and object-based audio formats like Dolby Atmos and DTS:X directly from apps in your compatible TV, allowing just one cable to run from the receiver to the TV.

Marantz SR7015 9.2-Channel Network A/V Receiver

Kevin Hernandez — Tue, 08 Dec 2020 19:41:10 +0000

9-Channel Discrete Amplifier

Featuring discrete power output devices on all channels, the SR7015 is rated up to 125 watts per channel at 8 ohms for a dynamic, precise sound experience.

8K HDMI with eARC

The main HDMI output supports eARC (enhanced Audio Return Channel) to enable uncompressed and object-based audio transmission directly from your TV to the receiver. A dedicated 8K input supports 8K UHD/60 Hz and 4K UHD/120 Hz video pass-through and upscaling. All HDMI inputs support 4:4:4 Pure Color sub-sampling, Dolby Vision, HDR10, HDR10+, HLG, various dynamic HDR formats, and BT.2020 pass-through for augmented color, clarity, and contrast. 8K upscaling (from as low as 480i) and HDCP 2.3 compatibility are available on all HDMI inputs. HDCP 2.3 processing lets you enjoy copy-protected content uninhibited. QMS (Quick Media Switching) is also supported.

3D Audio Support

Enjoy immersive 3D audio from formats like Dolby Atmos, Dolby Atmos Height Virtualization, DTS:X, and DTS Virtual:X for a 3D soundstage. Dolby Atmos uses dedicated up-firing or overhead speakers to provide height sound effects, while DTS:X and DTS Neural:X use your existing speaker setup to create virtual height channels from more traditional 7.2-, 5.2-, or 2.2-channel arrangements.

IMAX Enhanced

IMAX Enhanced certification designates that the SR7015 meets certain audio and video performance criteria set by a committee of IMAX and DTS engineers and A/V technical specialists. These criteria include image, sound, scale, and content quality. Onboard IMAX calibrated modes are set and approved by Hollywood colorists to help provide enhanced picture and sound for HDR UHD content.

Auro-3D

This technology is designed to provide 3D sound for music, games, broadcast TV, and movies with the Auromatic up-mixing engine.

Modern Gaming Support

In addition to 4K/120 Hz pass-through, the SR7015 supports Variable Refresh Rate (VRR), Quick Frame Transport (QFT), and Auto Low Latency Mode (ALLM) for reduced lag and frame tearing to provide a smooth gaming experience.

Dual Subwoofer Outputs

Connecting two subwoofers can smooth out low frequencies and provide better dispersion with fewer audible peaks or dips.

Works with Various Voice Assistants

Control the receiver hands-free with your Amazon Alexa, Google Assistant, Apple Siri, or Josh.ai ecosystem. Adjust the volume, skip to the next track, switch inputs between your different connected media players, and more. Availability varies by region and country.

Built-In Bluetooth, Wi-Fi, AirPlay 2 & HEOS Compatibility

With a dual-antenna transceiver system, you can enjoy robust Bluetooth and dual-band Wi-Fi streaming, even in congested urban environments. Listen to your favorite audio content wirelessly from your compatible smart devices. With HEOS built-in technology, you can play the same song in every room or a different song in each connected room HEOS supports free and premium Spotify, Pandora, Amazon Music HD, TuneIn, iHeartRadio, SoundCloud, SiriusXM, TIDAL, and more. AirPlay 2 lets you enjoy all your favorite songs from Apple Music, plus multi-room audio with other compatible components.

Bluetooth Audio Transmission

Transmit the receiver’s audio to your Bluetooth headphones to enjoy your media without disturbing anyone else in the house. You can also play the audio on both your Bluetooth headphones and connected speakers simultaneously if you or a family member or guest are hearing impaired.

High-Resolution Audio Support

The SR7015 can decode high-resolution audio file types, including ALAC, FLAC, and WAV at up to 192 kHz/24-bit. It also supports 2.8/5.6 MHz DSD files, the audio coding format of SACD. Play them from memory devices via the front panel USB or over network sources. Other file types like MP3 and WMA are also supported.

32-Bit D/A Conversion on All Channels

The SR7015 uses 32-bit AKM AK4458 digital-to-analog converters on all channels to provide optimal fidelity and a wide dynamic range with minimal distortion to help ensure consistent high-fidelity and precise channel matching across all channels.

Marantz HDAM (Hyper Dynamic Amplifier Module) and Current Feedback Topology

The SR7015 incorporates multiple HDAM modules, which are circuit boards engineered to provide low noise and wideband performance in a discrete configuration. HDAM technology is designed to provide a fast slew rate for a wideband response and an enhanced dynamic range to deliver optimum sound quality with high-resolution audio formats.

Phono (MM) Input with HDAM EQ Stage

The onboard phono MM input lets you connect your turntable directly to the receiver. The HDAM component is designed to outperform op-amp solutions due to its high speed and maintain a clean audio signal for enhanced sound performance.

Roon Tested

The SR7015 is Roon Tested to provide searchable information about your favorite artists and songs. Find lyrics, concert dates, photos, bios, reviews, and more.

Multi-Source, Multiroom

With the SR7015, you can enjoy 7.1-channel surround sound in one room and a separate source or music stream in up to two others, so you can watch a movie in the main room and other family members can listen to music from two different sources in two different zones without interruption.